EasyManuals Logo

Panasonic Lumix DMC-TZ100 User Manual

Panasonic Lumix DMC-TZ100
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #242 background imageLoading...
Page #242 background image
242
SQW0550
Stabiliser, Zoom and Flash
Taking pictures with flash
About [ ] (Forced Flash Off)
When pictures cannot be taken using the flash because the flash is closed or during
motion picture recording, etc., [ ] (Forced Flash Off) is displayed on the recording
screen and the flash will not fire.
TZ100/TZ101
Close the flash in places where its use is prohibited so that it will not fire.
TZ80/TZ81
Press and select [ ] in places where its use is prohibited so that it will not
fire.
How to use the flash effectively
Taking a picture using the flash with the subject too close may cause overexposure.
When you set [Highlight] in the [Custom] menu to [ON], the overexposed areas will flash
black and white during [Auto Review] or playback. If that happens, we recommend taking
the picture again, for example, after setting a lower flash output using [Flash Adjust.]
(→250).
The available flash range
Edges of a picture may become slightly dark if using flash at short distances without
using zoom (close to max. Wide). This may be remedied by using a little zoom.
Max. Wide Max. Tele
TZ100/TZ101
Approx. 0.6 m - 8.0 m
(2.0 feet - 26 feet)
Approx. 0.7 m - 3.8 m
(2.3 feet - 12 feet)
TZ80/TZ81
Approx. 0.6 m - 5.6 m
(2.0 feet - 18 feet)
Approx. 2.0 m - 2.9 m
(6.6 feet - 9.5 feet)
These ranges are obtained, the ISO sensitivity is set to [AUTO], and [ISO Limit Set] is
set to [OFF].
Avoid doing the following, as the heat or light could cause deformation or discolouration.
Putting the flash close to objects
Covering the flash with your hand as it is firing
TZ100/TZ101
Closing the flash as it is firing
TZ100/TZ101
Do not close the flash immediately after the preliminary flash is operated prior to taking pictures for
Forced ON/Red-Eye Reduction and other flash settings. If you close the flash immediately, it will
cause a malfunction.
Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being
charged, the flash icon flashes red, and you cannot take a picture even when you fully press the
shutter button.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-TZ100 and is the answer not in the manual?

Panasonic Lumix DMC-TZ100 Specifications

General IconGeneral
Effective Pixels20.1 Megapixels
LensLEICA DC VARIO-ELMARIT
ApertureF2.8 - F5.9
Battery LifeApprox. 300 shots (CIPA Standard)
Dimensions110.5 x 64.5 x 44.3 mm
Image ProcessorVenus Engine
Built-in FlashYes
Sensor1-inch High Sensitivity MOS Sensor
ISO Sensitivity125-12800 (expandable to 80-25600)
Shutter Speed60 - 1/2000 sec (Mechanical)
Video Recording4K UHD (3840 x 2160) at 30p
Viewfinder0.2-inch 1, 166k-dot EVF
LCD Monitor3.0-inch TFT LCD (1, 040k dots)
Image Stabilization5-axis Hybrid O.I.S. (Optical Image Stabilizer)
WeightApprox. 312g
ConnectivityWi-Fi, USB 2.0
Storage MediaSD, SDHC, SDXC Memory Card
Focal Length25-250mm (35mm equivalent)

Related product manuals