Panasonic Lumix DMC-TZ100 User Manual

98
SQW0550
Recording mode
Taking pictures after automatically setting the aperture value and shutter speed (Programme AE Mode)
•
TZ100/TZ101
The camera automatically removes noise when [Long Shtr NR] is set to [ON] and
the shutter speed is slow. Therefore, [Long shutter noise reduction ongoing] may
be displayed. (→144)
Although noise reduction requires the same time as the shutter speed for signal
processing, you can take sharp pictures.
•
TZ80/TZ81
The camera automatically removes noise when the shutter speed is slow.
Therefore, [Long shutter noise reduction ongoing] may be displayed.
Although noise reduction requires the same time as the shutter speed for signal
processing, you can take sharp pictures.
Enabling/disabling the exposure meter display
→ [Custom] → [Expo.Meter] → [ON] / [OFF]
●
When you set this function to [ON], an exposure meter is
displayed during Programme Shift, aperture setting, and
shutter speed operation.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP.]
button to switch the display of the monitor. (→53)
Exposure meter
250 125 60 30 15
5.64.02.8
50
p
●
The exposure meter will turn off if no operation is performed for approximately
4 seconds.

Panasonic Lumix DMC-TZ100 Specifications

General

Effective Pixels	20.1 Megapixels
Lens	LEICA DC VARIO-ELMARIT
Aperture	F2.8 - F5.9
Battery Life	Approx. 300 shots (CIPA Standard)
Dimensions	110.5 x 64.5 x 44.3 mm
Image Processor	Venus Engine
Built-in Flash	Yes
Sensor	1-inch High Sensitivity MOS Sensor
ISO Sensitivity	125-12800 (expandable to 80-25600)
Shutter Speed	60 - 1/2000 sec (Mechanical)
Video Recording	4K UHD (3840 x 2160) at 30p
Viewfinder	0.2-inch 1, 166k-dot EVF
LCD Monitor	3.0-inch TFT LCD (1, 040k dots)
Image Stabilization	5-axis Hybrid O.I.S. (Optical Image Stabilizer)
Weight	Approx. 312g
Connectivity	Wi-Fi, USB 2.0
Storage Media	SD, SDHC, SDXC Memory Card
Focal Length	25-250mm (35mm equivalent)