158
SQW0547
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
When selecting [ ]
You can set the focus position by selecting an AF area group. The
AF area, which is configured with 49 points, is divided into groups
consisting of 9 points each (6 points or 4 points for the groups
located at the edges of the screen).
Examples of group
Set the menu
→ [Rec] → [AF Mode]
Select [ ] and press
• The AF area setting screen appears.
Press to select an AF area group
• You can also select a group by touching the screen.
Press [MENU/SET]
• Only the [+] indications (center points of the selected group) remain on
the screen.
• Setting of the AF area is cleared when [MENU/SET] is pressed or [
]
is touched.
To Next Page
Loading...
