Panasonic LUMIX DMC-ZS100 User Manual

99
SQW0547
Recording mode
Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode)
About Program Shift
The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called “Program Shift”. You can use “Program
Shift” to take pictures by adjusting the shutter speed and aperture value even in Program
AE Mode.
<Example of Program Shift>
2.0
2.8
4.0
5.6
8.0
11
1 2 3 4 5 6 7 8 9 10 11 12 1413
1
1/2
1/4
1/8
1/15
1/30
1/60
1/125
1/250
1/500
1/1000
1/2000
1/4000
15
16
17
18
19
20
(Aperture value)
(EV)
(Shutter speed)
Program Shift amount
Represents the aperture and shutter speed set automatically by the camera at each exposure
value.
Program Shift diagram
Represents the range of the aperture and shutter speed combination you can change with
Program Shift at each exposure value.
Program Shift limit
Represents the range of the aperture and shutter speed you can select when you use Program
Shift with the camera.
●
Program Shift cannot be used in the following cases:
• When recording 4K photos
• When recording using [Post Focus]
• When ISO sensitivity is set to [
]

Panasonic LUMIX DMC-ZS100 Specifications

General

Effective Pixels	20.1 Megapixels
Optical Zoom	10x
Lens	LEICA DC VARIO-ELMARIT
Screen Size	3.0-inch
LCD Screen Resolution	1, 040, 000 dots
Viewfinder Resolution	1, 166, 000 dots
NFC	No
GPS	No
Built-in Flash	Yes
Sensor Type	MOS
Focal Length	25-250mm (35mm equivalent)
Maximum Aperture	F2.8-5.9
ISO Sensitivity	125 - 12800 (extended to 80 - 25600)
Video Recording	4K UHD (3840 x 2160) at 30p/24p
Viewfinder	Electronic
Image Stabilization	5-axis Hybrid O.I.S.
Connectivity	Wi-Fi
Battery	Li-ion Battery Pack (7.2V, 1025mAh)
Battery Life	Approx. 300 shots
Weight	Approx. 312g with battery and SD Memory Card (0.69 lb) / Approx. 267g without battery and SD Memory Card (0.59 lb)
Shutter Speed	60 - 1/2000 sec (Mechanical Shutter), 1 - 1/16000 sec (Electronic Shutter)