- 132 -
Using the GPS function to record the location of a picture
DMC-ZS20
Executing the positioning function right away to update the
current location
If the displayed place name is different from the current location or a previous location is
displayed, update the positioning information.
If some time has elapsed since the last time positioning was executed
successfully (
, , , or is displayed), we recommend updating
the positioning information.
Before starting the procedure, move to a place where positioning can be performed
successfully. (→128)
(Recording mode only)
Touch the GPS icon
Touch [Repositioning]
The GPS status indicator lights up and the
positioning reception icons appear on the screen
while positioning is executed.
●
The positioning information is also updated by the following operations.
• Set [GPS] in the Quick menu to [GPS] again.
• Select [Repositioning] from the [GPS] menu.
To Next Page
Loading...
Need help?
General
