- 27 -
Taking pictures with your own settings
[Program AE] Mode
Recording mode:
●
If a warning is displayed about jitter, use [Stabilizer], a
tripod, or [Selftimer].
●
If aperture and shutter speed are shown in red, you do
not have appropriate exposure. You should either use
the flash, change [Sensitivity] settings or set [Min. Shtr
Speed] to a slower speed.
Jitter alert
display
Aperture value Shutter speed
Using the [Rec] menu to change settings and set up your own recording environment.
• Slide the REC/PLAY switch to .
Set to ([Program AE] Mode)
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
To Next Page
Loading...
Need help?
General
