- 19 -
Inserting and removing the card (optional)
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
To remove the card, turn the camera off and wait until the LUMIX indicator on the
LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
• Set the camera ON/OFF switch to OFF
Slide to the release lever to the
[OPEN] position and open the card/
battery door
[OPEN] [LOCK]
Release lever
Insert the card all the way
• Push in until it clicks.
Card (Check orientation)
Do not touch
the terminals
on the back of
the card.
Close the card/battery door
• Slide the release lever to the [LOCK] position.
■
To remove card
Press the center of the card
To Next Page
Loading...
Need help?
General
