- 148 -
Using the map function
DMC-ZS20
Displaying only pictures taken in the same area
You can select the area of a picture on a map to narrow down the pictures to be
displayed.
Press [MAP] button in playback mode
Display the map so that the place where you took the pictures
is moved within the display range of the frame
Range of the area of pictures displayed in a list
Touch the +/- button to enlarge or reduce the map size.
(You can also enlarge or reduce the map size using the zoom
lever.)
Map scale level (The levels that can be displayed vary depending on the region)
• You can drag the screen or press the cursor button to operate the display location
of a map.
Press [DISP.] button
Place where you took the
selected picture
Place where you took the
pictures displayed in a list
Touch to display another picture
Touch to narrow down the
pictures to be displayed
Picture list
Touch to display another picture
Touch a picture in the picture list to display it
Only pictures taken at a location within the display range of the frame are displayed
([Filtering Play]).
• You can also display a picture by selecting it using the cursor button and pressing
[MENU/SET].
• Select [Normal Play] from the [Playback Mode] menu to cancel [Filtering Play].
●
When the map is at its maximum size the location where the picture was taken and the
picture list will not be displayed.
To Next Page
Loading...
Need help?
General
