- 168 -
Printing
Preparation:
• Charge the battery sufficiently.
• When printing pictures from the
built-in memory, remove any memory
cards.
• Adjust the print quality or other
settings on your printer, as needed.
• Turn on the camera and printer.
Connect camera to printer
• Please make sure you use the supplied USB connection cable. Use of cables
other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge(PTP)],
and press [MENU/SET]
Use cursor button to select a picture to print and press
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→171))
■
To cancel print Press [MENU/SET].
Check socket direction and insert straight in.
(If the cable is inserted in the wrong direction, the
socket could become deformed and cause faulty
operation)
• Do not disconnect the USB connection cable
when the cable disconnection icon
is displayed
(may not be displayed with some printers).
USB connection cable
(always use cable supplied)
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.
To Next Page
Loading...
Need help?
General
