- 140 -
Adjusting the time using GPS
DMC-ZS20
You can automatically update the [Clock Set] of the camera using the date and time
information contained in GPS radio signals. When you move to a different time zone
from your home area and positioning is executed successfully, the camera automatically
adjusts the time to the local time.
Select [Auto Clock Set] from [Setup] menu and press
[MENU/SET]
• Displaying the [Setup] menu (→51)
Use cursor button to select [ON] and press [MENU/SET]
(for the first time only)
When [Please set the home area] is displayed, press
[MENU/SET]
Press to set your home area and press [MENU/SET]
City or area
name Current time
Difference from GMT (Greenwich Mean Time)
●
When [Auto Clock Set] is set to [ON], the following settings are also changed
automatically.
• [GPS Setting]: [ON]
• [World Time]: [Destination]
●
The date and time adjusted by [Auto Clock Set] are not as accurate as those of clock
radios. If the date and time are not adjusted accurately, use [Clock Set] to re-adjust the
date and time.
To Next Page
Loading...
Need help?
General
