- 143 -
Reducing the time required for positioning
DMC-ZS20
■
Using a card reader/writer (commercially available)
Preparation: • Turn on the computer that is connected to a card reader/writer
(commercially available) and close all other open application programs.
• Insert a memory card in the camera before starting the updating
procedure.
Perform steps to of “Using “GPS Assist Tool” by
connecting the camera and computer” (→142)
Use cursor button to select [SD card] and press [MENU/SET]
The “GPS Assist Tool” is copied to a memory card.
Turn off the camera and remove the memory card
Insert the memory card into a card reader/writer (commercially
available) connected to the computer
Start up the “GPS Assist Tool” stored in the memory card on
the computer and update the GPS assist data (→144)
Remove the memory card from the computer
Insert the memory card into the camera and turn on the
camera
The GPS assist data of the camera is updated.
To Next Page
Loading...
Need help?
General
