Panasonic MCDLT35BM - Feedback Scale Input Signal Specification

No. SX-DSV03335 - 7-
R2.0 Industrial Device Solution Business Unit, Panasonic Corporation
Feedback scale input signal specification
The A/B signal at less than or equal to the maximum output frequency 4 Mbps are available.
Please use under the following conditions.
At negative direction
At positive direction
B phase advances 90 deg. from the A-phase
t1 t2 t3 t4> 0.25 µs
T > 1.0 µs
Internal signal
of servo driver
A phase advances 90 deg. from the B-phase
t1 t2 t3 t4> 0.25 µs
T > 1.0 µs
Internal signal
of servo driver
Please note that if the duty ratio of the scale input signal waveform is not 50%,
it may not be able to be read normally
t4
T
t1
T
A phase
B phase
t1
t2
t3
t4
t3
t2
A phase
B phase