No. SX-DSV03015 - 63 -
Motor Business Unit, Panasonic Corporation
13. Specification for each model
Model MADLN01SE MADLN11SE MADLN05SE MADLN15SE
Power supply input
Single phase/
3 phase 200 V
Single phase/
3 phase 200 V
Maximum current rating 6 A 8 A 6 A 8 A
Rotary encoder feedback signal Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r
Regenerative discharge resistor Externally connected Externally connected Externally connected Externally connected
Auto gain tuning function Provided Provided Provided Provided
Dynamic brake function Provided Provided Provided Provided
Absolute system Available
NOTE)
Available
NOTE)
Available
NOTE)
Available
NOTE)
Ambient temperature main power
supply cable
0 – 55 °C 0 – 55 °C 0 – 55 °C 0 – 55 °C
AWG18 AWG18 AWG18 AWG18
Main power supply cable
2
2
2
2
AWG14 - 18 AWG14 - 18 AWG14 - 18 AWG14 - 18
Ground cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14 AWG14 AWG14
Motor cable
2
2
2
2
AWG14 - 18 AWG14 - 18 AWG14 - 18 AWG14 - 18
Inrush current
(Main power supply) (*1)
Max. 7 A Max. 7 A Max. 14 A Max. 14 A
Inrush current
(Control power supply) (*1)
Max. 7 A Max. 7 A Max. 14 A Max. 14 A
Dimensions Size A Size A Size A Size A
(*1) Current values were calculated on the basis of the power supply input described above, assuming a voltage of
100 V or 200 V.
(Note) The absolute encoder backup battery is externally connected.
<Caution>
The lithium-metal battery is used as a backup battery.
There are restrictions for transportation of the lithium-metal batteries by an international transport rule
of dangerous goods etc.
Please inquire in detail through the purchase shop.
To Next Page
Loading...