Panasonic MicroClear TK-CS500 - How to Use

English
How to Use
1
Set the bypass selector to
“ ” : Puried water “ ” : Unpuried
2
Open the faucet.
z
At the beginning of daily use, run water approx. 0.6 liters (approx. 18 seconds) before using.
(P. EN 4)
Tap water
Puried water
z
The water
purication mark
lights.
Note
z
If water is discharged when the batteries are at, the water will be puried however water
volume or usage time used as the reference for replacing the cartridge will not be counted,
and the cartridge life will not be displayed correctly.
3
After use, close the faucet.
z
Water may come out slightly from the main spout even after the water ow is stopped.
It is not a malfunction. (This is water remaining in the outlet pipe.)
z

Stopping water purication causes water purication mark to turn o󰀨 and the cartridge life
indicator to light. (Approx. 3 seconds) (P. EN18)
EN15
TK-CS500_01_EN.indd 14TK-CS500_01_EN.indd 14 2024/03/21 14:52:352024/03/21 14:52:35