Maintenance
Important
z
Do not use detergents, cleansers, paint thinners, benzine, alcohol or kerosene for cleaning purposes.
If, for instance, a detergent is used by mistake, wipe the surface with a damp cloth immediately to
remove all traces of the detergent.
Otherwise,
•
The detergent may get mixed in with the water running through the Water Purier, the plated parts
maybe damaged or peel o.
•
The plastic parts may become damaged, discolored or deformed.
y
Use of cleansers may also impair the workings of the outlet pipe and cause trouble.
z
Do not use brushes or other implements made of metal (since they may leave scratch marks).
z
Do not use a tool to tighten up the nut (since the nut may be damaged).
Main unit, bypass selector, outlet pipe, and tray
Soak a soft cloth in water, wring it
out well, and use it to wipe the units
and parts.
At least once
a week
Main spout
Bypass selector
Remove
the stain using
a clean cotton
swab, etc.
Remove the
dirt using a
clean toothbrush
or other similar
tool.
Wash with
running water
and wipe with
a soft cloth.
EN16
TK-CS500_01_EN.indd 15TK-CS500_01_EN.indd 15 2024/01/17 9:57:092024/01/17 9:57:09
To Next Page
Loading...
