11
Before Use
Quick Guide
Insert the Battery Pack
Insert Cassette
1 Insert the Battery Pack and slide
it up until it locks with a click.
1 Press LCD-OPEN to unlock the LCD
monitor, and swing it fully open.
3 Slide TAPE EJECT to open
the Cassette Compartment
Cover.
Before you begin
• Charge the Battery. (p. 14)
2 Set POWER to VCR or
CAMERA.
1
2
These Palmcorders are equipped with the Easy Cassette Eject System so
it is easy to insert or remove tapes, even when on a tripod. (p. 7)
4 Insert a cassette record tab
up, window side facing out.
• Make sure the record tab
is closed. (p. 7)
5 Press PUSH CLOSE mark to
close the Cassette
Compartment Cover.
(PV-DV402-K shown)
DV202_402-K.p 11-14.p65 2003/06/12, 10:1411
To Next Page
Loading...
