38
Strobe Multi Mode
1 Set POWER to VCR.
2 Press MENU to display the menu
screen.
3 Rotate and press JOG KEY to select
and set MULTI SETTING .
4 Press JOG KEY repeatedly to set
desired speed.
• Press MENU twice to exit.
5 Press (PLAY) to start playback.
Press (MULTI) at the point you want
to start capturing.
• A succession of 9 screens will be
captured, and playback will stop.
• Press
(PLAY) to start playback.
Press (STOP) to stop playback.
Strobe Speeds
Strobe Speeds
FAST
NORM
SLOW
9 screen capture time
Every 0.3 seconds
Every 0.6 seconds
Every 1.0 seconds
• A Multi Image Playback screen cannot be
output from the DV terminal or Digital Still
Image terminal.
• A Multi screen will have slightly lower
image quality.
Note
In Strobe Multi Mode, you can select the
rate at which a succession of still screens
are captured from the playback picture.
3, 4
JOG KEY
1POWER
5PLAY
5MULTI
Special Effect Features
EVF/LCD
2MENU
DV202_402-K.p 36-39.p65 2003/06/12, 10:1438
To Next Page
Loading...
