92
Transferring Your Images (Macintosh)
You can transfer images from your Palmcorder Memory Card to your Macintosh.
• Mac OS 9.0~9.1
• Mac OS 8.6~9.1 (for ArcSoft Software)
• iMac, iBook or Power Macintosh
G3 with
USB port or Power Mac
G4
• RAM: 64 MB or more
• CD-ROM drive (for installation)
System Requirements
(for Built-in SD Drive/ArcSoft Software (PV-DV402-K only)
• USB Port
• Mouse or other pointing device
• 210 MB minimum available hard disk
space (for ArcSoft Software)
• High colour (16 bit) or more (for ArcSoft
Software)
Even if system requirements are met, there is no guarantee that the included software
will work on all personal computers.
Connection
3
2
USB Terminal
USB Terminal
1 Turn on your PC.
2 Set the Palmcorder POWER to M-CARD.
3 Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
• For extended use, it is recommended that you use the AC Adaptor as a power source.
USB Cable
(supplied)
Note
DV202_402-K.p 92-93.p65 2003/06/12, 10:1592
To Next Page
Loading...
