80
Palmcorder File Converter
Using Palmcorder File
Converter
You can convert the JPEG data of your PC
into DCF (Design rule for Camera File
System) data, and transfer this data to your
Palmcorder via USB.
1 Set Palmcorder POWER to M-CARD.
2 Connect the Palmcorder to your PC
using the USB Cable (supplied).
(pp. 77, 78)
3 Click on “Start,” “(All) Programs,”
“Panasonic,” “Palmcorder,” then
“File Converter 3.0.”
4 Select and click “To resize the
image” or “To convert format for
Panasonic Digital Palmcorder.”
• To resize the image:
The size of images captured with the
Palmcorder can be increased or
decreased to make them suitable for
Internet and E-mail use.
• To convert format for Panasonic Digital
Palmcorder:
Images can be converted to JPEG format
and to file names that can be played back
on the Palmcorder.
When selecting “To resize the
image”
5 Select the size for the image you
want to change. Then, click on
“File select” and select the file to be
converted.
• When User Select is selected, you
can specify a size within a range of
2048 x 1536 ~ 64 x 48 pixels.
Note
(Continued on next page.)
DV202_402-K.p 80-81.p65 2003/06/12, 10:1580
To Next Page
Loading...
