Panasonic MultiCam PV-DV202-K - Frame by Frame Advance

36
Frame by Frame Advance
(Remote Control Only)
Note
1 Press PAUSE during playback.
2 Press SLOW/F.ADV to do a frame
by frame advance.
Press
SLOW/F.ADV to do a frame
by frame reverse.
3 Press PLAY to release.
• If you hold down SLOW/F.ADV, you can
see a continuous series of still images at
a slower speed than normal slow mode.
• During frame by frame advance, a few
frames may move automatically, and the
picture may become bluish for an instant.
2 SLOW/
F.ADV
3PLAY
2 SLOW/
F.ADV
1PAUSE
Special Effect Features
• The picture quality will deteriorate slightly.
• The tape remaining indicator will not
appear while the PHOTOSHOT feature is
used.
• In the Photo/Scene Index Search mode,
the shutter sound effect may not be able
to be heard even when SHUTTER is set
to ON.
• Photo Index Search may fail to detect a
recorded PhotoShot image if the image is
3 seconds or less.
1 Press MENU to display the VCR
mode menu screen.
2 Rotate JOG KEY to select PLAY
MODE , and press JOG KEY to
display the VCR PLAY MODE menu
screen.
3 Rotate JOG KEY to select INDEX ,
and press JOG KEY to select
PHOTO or SCENE.
• Press MENU twice to exit.
4 Press INDEX SEARCH fast forward
or rewind on the remote control to
advance or rewind the tape to
playback a PhotoShot scene. To view
the next PhotoShot, INDEX SEARCH
must be pressed again.
Index Search (Photo/Scene)
(Remote Control Only)
Note
4INDEX SEARCH
(rewind)
4INDEX SEARCH
(fast forward)
2, 3
JOG KEY
1MENU
• Sound is muted during all special effects.
Note
DV202_402-K.p 36-39.p65 2003/06/12, 10:1436