9
Before Use
Before Using
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
You can operate the major functions of your Palmcorder from up to approximately 5 m
(16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder
and press the desired buttons (Remote Sensor is located under the lens).
Remote Control
○○○○
Remote Sensor
Controlled Functions
• Rec/Pause (p. 18)
• Tele (Zoom) (p. 21)
• Wide (Zoom) (p. 21)
• Date/Time (p. 107)
• Reset (p. 45)
• PhotoShot (p. 20)
• Display On TV (p. 39)
• Counter/Time Code (p. 108)
• Audio Dubbing (p. 44)
• Record (p. 48)
• Menu (pp. 17, 45)
• Play (pp. 32, 48)
• FF/Search (p. 34)
• REW/Search (p. 34)
• Pause/Select (pp. 16, 17, 36, 48)
• Stop/Set (pp. 16, 17, 32, 48)
• Slow/Frame Advance (Forward)
(pp. 35, 36)
• Slow/Frame Advance (Backward)
(pp. 35, 36)
• Index Search (Forward) (pp. 36, 37)
• Index Search (Backward) (pp. 36, 37)
• Speaker Volume (p. 33)
1 Hold down LIGHT for more than
0.7 seconds to turn ON or OFF.
•“
” will appear on the screen.
To brighten the natural colours in a scene.
Using the Built-in Light
Caution
This light becomes hot during operation.
Make sure nothing covers the light during
operation.
• Using Light reduces battery time.
• Provide adequate ventilation if using
Light in a hot environment for a long time.
• Set LIGHT to OFF when not in use.
• If light bulb needs to be replaced, take
the Palmcorder to your nearest
authorized Servicentre.
Built-in Light
Note
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
• Set POWER to CAMERA or M-CARD.
1LIGHT
DV202_402-K.p 5-10.p65 2003/06/12, 10:149
To Next Page
Loading...
