Panasonic MultiCam PV-DV202-K - Page 66

66
PHOTOVU/MPEG4 Movie Messenger System
Using the VideoGift Screen
4 Click on [All] or [Picture] to display a
Still image list on the View Manager
screen.
5 Click on [Still Mode] on the VideoGift
screen.
6 Select the Still image from the View
Manager screen, then drag and drop
the image to the “VideoGift” screen.
• When clicking [Add Image], you can
add the saved still images on
your PC hard disk.
• If selecting a frame from a motion
image, See “Selecting a Frame from
a Motion Image” on page 71.
• You can use the VideoGift features
(p. 65) on the VideoGift screen.
4Movie
4Picture
Using a Still Image on the
VideoGift Screen
Using a Motion Image on the
VideoGift Screen
2
VideoGift
3View
Manager
4All
5Movie Mode
6Open Movie
6Add Image
5Still Mode
1 Repeat steps 1~4 on page 62 to run
the PHOTOVU/MPEG4 Movie
Messenger System.
2 Click [VideoGift] to display the
VideoGift screen.
• The image captured last is displayed
in the VideoGift screen.
• If “Unable To Locate DLL” warning
indication is displayed, please see
page 91.
3 Click [View Manager] to display the
View Manager screen.
4 Click on [Movie] to display a Motion
image list on the View Manager screen.
5 Click on [Movie Mode] on the
VideoGift screen.
6 Select the Motion image from the
View Manager screen, then drag and
drop the image to the “VideoGift”
screen.
• By clicking [Open Movie], you can
add the saved motion images on your
PC hard disk. You can also select the
file by dragging and dropping from
Windows Explorer.
• You can use the VideoGift features
(p. 65) on the VideoGift screen.
Caution for Windows 2000 users
DV202_402-K.p 66-68.p65 2003/06/12, 10:1566