Panasonic Omnivision PV-V4640

One Time VCR Setup (continued)
Start Clock Auto Set.
CLOCK AUTO SET
10
Press CHA.
CONNECT ANTENNA CABLE A
AND IF YOU USE A CABLE * “AUTO
BOX, TUNE IT TO YOUR CLOCK SET
LOCAL PBS CH THEN... CH PROCEEDING’
appears.
PLEASE PUSH CH UP KEY
Confirm thattimeis
1/ 4/2000 TUE 12: DON correct,
SETTING
:
ce
oO
Press
CHA
AUTO
CLOCK
SET
to
exit.
COMPLETED CH
END : PUSH CH UP KEY
If displaved time is incorrect...
If your area observes DST (daylight saving time), but the
time is incorrect; do “Time Zone Adjust” steps on page 41.
Or, if you use cable box and receive more than one PBS
station, try auto clock set again entering the one you have
not tried yet (See “Clock” on page 40.)
If the screen below appears...
Auto clock set data is not available in your area.
Press ACTION to display Manual Clock Set screen, and
then do steps b) ~ d) on page 11.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
-To Setup VCR in Case a Cable Box or DSS
: Receiver was Installed or Replaced.
a Press ACTION to display Menu. ae
SET UP VCR
SET UP FEATURE
b Press AV to select “SET UP CL
CHANNEL,” then press P.
c Press AY to select “CABLE/
pas BOX SET UP,” then press
TERNA: : ne Nn
d Press AY to select “CABLE/ AUTO SET.
DSS BOX P VCR P Tv,” then
press > to set.
CHANNEL CAPTION
WEAK SIGNAL DISPLAY _: OFF
VCR Plus+ CH SET UP
SELECT: Y KEY
e Continue with steps 4-8 on o
pages 8-9,
Auto clock set will be performed when VCRistumed off the
firsttime each day.
Therefore, cable box must be left on and tuned to
PBS channel before VCR power is turned off.
10 |
> K
¡ACTION KEY
Process of Setup
ELTEL G => Cable/DSS Receiver
> (ELIE > KLA
SELECT/
ACTION
10 CHA
11
Using AV«4> keys
You can also operate the menu screen using
VCR buttons.
When menu screens are displayed, the PLAY,
STOP, REWIND, and FF buttons on the VCR
and remote function as AW » only with no
tape inserted.
On Remote
A : PLAY «: REW
y : STOP »:FF
To display menu using VCR buttons, press
CH A and CH Y together.
To exit the menu, repeat above.
For assistance, call 1-800-211-PANA(7262).