Panasonic Omnivision PV-V4640

When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
« The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
fe Display audio mode.
SAP/Hi-Fi
yá
€D
Press
SAP/
Hi-Fi.
Audio Mode for Recording
Select desired mode.
Press SAP/ Hi-Fi
SAP/H-Fi | repeatedly (each
(000) press within 5
seconds).
. Refer to the “Receivable
e Arrow indicates selection. Broadcast Types’ on page 32.
Do a recording.
See page 9.
Audio Mode for Playback
Start playback.
See page 8.
Display audio mode.
“ES Press SAP/ Hi-Fi.
Select desired mode.
Press SAP/ Hi-Fi
SAP/H-Fi | repeatedly (each
200) press within 5
seconds).
HIFI (L/R) 4
HIFI (L)
HIFI (R)
NORMAL
* Select “HIFI(L/R)” or “HIFI{L)” or
“HIFI(R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural
sound.
» Arrow indicates selection.
O: O-N
SAP/
. Hi-Fi
« Only tapes recorded in Hi-Fi stereo
will play back with true stereo sound.
Standard stereo tapes wilt playback
in monaural sound.
* To listen to Hi-Fi stereo playback, the
VCR AUDIO (L/R) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 32.)
* |f tracking is adjusted during playback,
Hi-Fi audio may revert to normal
audio.
e Hi-Fi and normal audio playback
volume level may differ.
33
WaISÁS 091918 I4-IH SHAASeopeoig SLIN