Panasonic Omnivision PV-V4640

MTS Broadcast/VHS Hi-Fi Stereo System
A check list before you begin.
O VCR is connected to a stereo TV, or a mono TV and an external
stereo amp or receiver with speakers.
OU VCR and other components are plugged in and turned on.
Connections to Make
To monitor recording in progress in stereo,
connect VCR to stereo TV or mono TV and
stereo amp with speakers.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an “(«” mark while the selected
audio mode is indicated with an arrow.
Display the broadcast signal being received.
DISPLAY | Press DISPLAY.
¿QUID
MTS
Stereo
and
SAP
broadcast
STOP
12:00AM.
ABC
Multi-channel
Television
Sound
Stereo
0:00:0
(main
language)
and
Secondary
Audio
es
SP
Program
(sub
language)
broadcasts
are
MONO
both being received simultaneously.
Select
STEREO
or
SAP
audio
mode.
DISPLAY
MTS Stereo broadcast STOP 12:00AM 0:08
(STEREO « "Sp
SAP
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
* If stereo broadcast is weak and display MONO
flickers,select MONO audio mode for
possibly betterresults.
SAP
broadcast
STOP
12:00AM
oooO
Secondary
Audio
Program
(sub
language)
epee
A
sp
broadcast.
Select
SAP
audio
mode
for
the
MONO
sub language.
Equipped with dbx*-TV Noise Reduction
MONO broadcast STOP 12:00AM ABC for true MTS reproduction. dbx"-TV
Normal
monaural
sound
broadcast.
:
STEREO
sp
Noise
Reduction
is
required
for
good
SAP stereo separation and audio fidelity. dbx?
MONO 4 is a registered trademark, and is
licensed by dbx? Technology Licensing.
Y l For assistance, call 1-800-211-PANA(7262).