Panasonic Omnivision PV-V4640

*Important: If the remote contro! POWER, ACTION, PROG/ VCR+, CHA/V, NUMBERED keys,
INPUT, SEARCH/ M/A SKIP or ADD/DLT button does not work when pressed, press
the VCR button on the remote and try the button again.
¡A check list before you begin.
O All connections are made.
One time Setup completed.
O VCR is plugged in.
LI TV is turned on and set to CH3, 4 or Video on TV.
MOVIE” ADVANCE?
MOVIE» ADVANCE" helps you locate certain parts of
prerecorded movies (rented or purchased).
The feature works in two ways.
* You can go to the beginning of the movie.
* You can skip from one preview to the next.
MOVIE» ADVANCE" works only on cassette recorded in SP
speed with the record tab removed.
| Insert a cassette 6 PLay
| without record tab.
SELECT/
SET
A :PLAY
H
77
Y
:STOP
SEARCH
Display
“SELECT
J
err
Os
SEARCH
MODE.”
a
M/A SKIP 1) Press SEARCH/
M/A SKIP.*
* If you inserted a cassette with the record tab or if you STOP
selected “INDEX SEARCH” go to page 29. .
SELECT
SEARCH
MODE
Display
MOVIE
?
SEARCH
å
INDEX
SEARCH
ADVANCE.
ARE
>
PROGRAM
END
SEARCH
~~
|1)
Press
AY
E
nz |
to
select.
e)
SELECT:
A
Y
KEY
-CE9
2)
Press
>
5
:
»
KEY
no
>œ
“1
to
set.
D
:SEARCH
M/A
SKIP
z
e
ADVANCE
Select
GO
TO
START
9
OF MOVIEorGOTO
To
Search
for
Preview.
SELECT SEARCH MODE
You can override the operation of
MOVIE ADVANCE* SEARCH FOR PREVIEWS
mode by pressing SEARCH/ M/A SKIP during
tape searching. MOVIE ADVANCE’ works by
searching the tape past each preview and then
reversing back to the start of the detected
preview. While the tape is reversing back, if
SEARCH/ M/A SKIP Is pressed,
PREVIEW.
GO TO START OF MOVIE aa
GO TO PREVIEW Press AV
cz. to select.
SELECT:4 Y KEY
SET ¡> KEY
END ¡SEARCH M/A SKIP
Select “GO TO START OF MOVIE.” if you want to
advance directly to beginning of the movie.
--> continue with step 5.
Select “GO TO PREVIEW.” if you want to view the
first (next) preview.
--> go to “To Search for Preview” at right.
Start searching.
Press > .
`|» To cancel,
' press STOP.
MOVIE ADVANCE
SEARCHING FOR START
OF MOVIE
CANCEL : STOP KEY
When the movie is found...
Start playback.
Press PLAY.
MOVIE ADVANCE
THE MOVIE IS READY.
PUSH PLAY TO START ¢ To cancel,
press STOP.
e The display will
time out after 3
minutes and the
VCR will enter
the Stop mode..
CANCEL : STOP KEY
MOVIE ADVANCE” Will begin searching for the
next preview. While searching for the next
preview, if you see the start of a preview which
you wish to watch, press SEARCH/ M/A SKIP
and MOVIE» ADVANCE’ will immediately
reverse back to the start of that preview, instead
of searching further past the preview start point.
Once the VCR is playing a preview, press
SEARCH/ M/A SKIP to advance to the next
preview, long commercial or the start of the
movie (whichever is next).
Start preview searching.
1) In step 4 at left, select
Go To PREVIEW.
2) Press P.
e If you want to playback, press PLAY.
When a preview is detected, VCR
will start playback.
Start next preview
searching.
Press SEARCH/ M/A SKIP.
* To cancel, press STOP.
27
SEARCH
e
M/A SKIP