Panasonic Omnivision PV-V4640

*Important: If the remote control POWER, ACTION, PROG/VCR+, CH4/¥, NUMBERED keys,
INPUT, SEARCH/ M/A SKIP or ADD/DLT button does not work when pressed, press
the VCR button on the remote and try the button again.
Repeat Play
Set to see a a over and over.
1 Display MENU.
Press ACTION.*
ENU Display DR AA Display SETUP VCR. UP VCR. SELECT/
SET UP VC
, Ser RE 1) Press AY to select. ay
SUE
e
2)
Press
>
to
display.
Y
¿“STOP
IDIOMA / LANGUE: ENGLISH * »:FF
VCR' S OUTPUT CH:3
SELECT: Y KEY e
1 ACTION
Ser
UR
YER
Set
ON
or
OFF.
A
_-,~., 11) Press AY to
select “REPEAT
PLAY.”
pee ee ? 12) Press P to set. A DISPLAY
e ¢ Playback repeats when tape end is COUNTER
END: -ACTION -KEY reached or unrecorded porion over 30 RESET Pe
Conds
is
detected
2
is
detected.
E
Return to normal screen. Q
Press ACTION twice. d SEARCH O
M/A SKIP w
=
=
To quickly return to specific tape counter location,
a DISPLAY Display Counter.
E Press DISPLAY during playback.
PLAY
12:00AM
Reset
to
“0:00:00.”
b
0:00:90
Press
COUNTER
RESET
at
the
desired
position.
C Continue Recording,playback etc.
SEARCH, Display SELECT SEARCH
©- MODE in Stop mode.
WA SKIP Press SEARCH/ M/A SKIP.*
SELECT SEARCH MODE | Start ZERO SEARCH.
1) Press AY to select.
I NDEX SEARCH ,
PROGRAM END SEARCH C2. 12) Press P to display.
PROGRAM INDEX SEARCH
SELECT:4 Y KEY :
¡> KEY
:SEARCH M/A SKIP | » Unit will go into FF or REW mode
and stop at the last point the
Counter was set to 0:00:00.
31