Panasonic Omnivision PV-V4640

Playback aTape
Multi Function Display STOP/ EJECT
PE ae
> Fe _ - A
FF
STOP
SLOW
Sapnai
ES
@ To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
[Z check list before you begin.
O All connections are made.
O TV and VCR are plugged in.
O TV is tumed on and set to CH3, 4 or Video on TV.
Ol Remote is in VCR mode.
Insert a cassette.
+ VCR power comes on and “VCR”
appears on Multi Function Display.
Press PLAY.
* Or, if cassette has no record tab
(see page 42), auto playback begins.
E To Find a Particular Scene
Forward Search --> Press FF. (To release, press PLAY
or FF.)
Reverse Search --> Press REW. (To release, press PLAY
or REW.)
W For Still (Freeze) picture --> Press PAUSE/SLOW.
(To release, press PLAY.)
E For Frame by Frame picture --> Press PAUSE/SLOW in
Still mode.
(To release, press PLAY.)
E For Slow Motion --> Press and hold PAUSE/SLOW in Still
mode. (To release, press PLAY.)
+ These features work best in SP or SLP mode.
* The sound will be muted.
* To reduce picture noise, see “Manual Tracking Control" on page 43.
+ After the VCR is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head.
W To stop --> Press STOP.
Rapid Rewind! FF
Wi To rewind tape --> Press REW in Stop mode.
W To fast forward tape --> Press FF in Stop mode.
+ Rewind your tape in approximately one minute when
using a T-120 tape.
W To eject tape --> Press EJECT on the remote or
STOP/ EJECT on the VCR.
Playback using VCR controls
1 Insert a cassette.
2 Press PLAY.
M Press to stop and/ or eject tape.
For assistance, call 1-800-211-PANA(7262).