Chapter 5 Maintenance — Troubleshooting
170 - ENGLISH
Problems Points to be checked Page
Cannot control the
projector with Art-Net.
f Are the connections between the twisted-pair-cable transmitter and the projector or
an external device correctly done?
―
f Is [Art-Net SETUP] set to other than [OFF]? 141
f Are the [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] settings correct? 141
The DIGITAL LINK input
image is not displayed.
f Are the connections between the twisted-pair-cable transmitter and the projector or
an external device correctly done?
―
f Is [DIGITAL LINK MODE] set to [AUTO] or [DIGITAL LINK]? Is it set to
[ETHERNET]?
138
f Is a signal which is not compatible with a twisted-pair-cable transmitter being input? ―
Attention
f If problems persist even after checking the preceding points, consult your dealer.
To Next Page
Loading...
