Panasonic PT-DZ570U

DISPLAY OPTION menu
56
- ENGLISH
Settings
AUTO SETUP
Use this setting when adjusting a specic or oblong
(16:9, etc.) signal.
Press ▲▼ to select [AUTO SETUP].1 )
Press <ENTER> button.2 )
The [AUTO SETUP] screen will be displayed.
z
Press ▲▼ to select [MODE].3 )
Press ◄► to switch [MODE].4 )
The setting will change as follows each time
z
◄► is pressed.
DEFAULT WIDE USER
DEFAULT
To receive signals of which image
aspect is 4:3 or 5:4
(applicable resolution : 640 × 400,
640 × 480, 800 × 600, 832 × 624,
960 × 720, 1 024 × 768,
1 152 × 864, 1 152 × 870,
1 280 × 960, 1 280 × 1 024,
1 600 × 1 200, 1 400 × 1 050)
WIDE
To receive signals of which the
image aspect is wide
(applicable resolution: 720 × 400,
848 × 480, 1 280 × 720,
1 024 × 600, 1 120 × 750,
1 440 × 900, 1 680 × 1 050)
USER
To receive signals of specic
horizontal resolution (number of
horizontally displayed dots)
If [USER] is selected, press ◄► to 5 )
enter the horizontal resolution of
signal source into [DISPLAY DOTS].
Press <ENTER> button.6 )
Execute automatic adjustment. A message
z
“PROGRESS” appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
J
Adjusting the position
automatically
Select [POSITION ADJUST] in step 3).1.
Press ◄► to switch [POSITION 2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
Screen position and size are
adjusted during AUTO SETUP
operation.
J
Adjusting the signal level
automatically
Select [SIGNAL LEVEL ADJUST] in 1.
step 3).
Press ◄► to switch [SIGNAL LEVEL 2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
The black level (On-screen menu
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
If the input image is not a still image with a clear
z
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.