Adjustments
Disassembly / Replaced parts
LCD/
prism assy
Polarized
Glass
Condenser
lens (OUT)/
Relay
lens (OUT)/
Integrator lens
Power board Main board
Fans Wind
Sensor
Optical adjust-
ments
Optical axis adjustment
●
Contrast adjustment
● ●
Electrical Adjustments
Fan voltage adjustment
● ● ●(Fan)
Panel type check and setting
❍ ●
Auto calibration adjustment [PC]
❍
Auto calibration adjustment [Component]
❍
Auto calibration adjustment [Video]
❍
Common center adjustment
● ●
Gamma shipment adjustment *
❍ ●
White balance adjustment [PC]
❍ ●
Color shading correction adjustment *
❍ ❍ ❍
Wind sensor calibration
● ● ●(S901)
Lens shift centering setting
●
*
To setup or adjust those items, the Projector Service Tool v. 4.20 software is needed. Refer to the owner's
manual for this software for the further details.
● : Adjustment necessary ❍ : Check necessary
Adjustments after parts replacement
To Next Page
Loading...
