About Your Projector
Projector body
Top and front view
J
Zoom ring
Adjust the projection size
.
(
Æ
page 23)
Adjuster
button
(
Æ
page 16)
Remote
control signal receptor
Ambient
Luminance Sensor (ALS)
TEMP indicator
Indicates the temperature status.
(
Æ
page 46)
LAMP indicator
Indicates the lamp unit status.
(
Æ
page 46)
POWER indicator
Indicates the power supply status.
(
Æ
page 20)
POWER LOCK indicator
Indicates the locking status of the POWER button.
(
Æ
page 20)
Focus ring
Adjust the focus.
(
Æ
page 23)
Air intake port
Lens cover
Adjuster button
(
Æ
page 16)
Zoom-Focus ring cover
Control panel
Note
Do not use other than a provided power cord.
z
Do not cover the ventilation openings of the air intake port or air outlet port.
z
After adjusting the zoom and focus, be sure to close the Zoom-Focus ring cover to protect from dust.
z
Do not apply extreme force on the Zoom-Focus ring cover.
z
J
Control panel
RELEASE button
Press to release the
locked POWER button
when turning on the
projector.
(
Æ
page 21)
POWER button
Switch between standby mode
and projection mode.
(
Æ
page 21)
INPUT SELECT button
Switch to cycle through the input
method.
(
Æ
page 24)
FUNCTION button
Assign a useful function for a
shortcut.
(
Æ
page 26, 41)
To Next Page
Loading...
