Panasonic PT-MZ17K - Page 201

Chapter 5 Operations — Web control function
ENGLISH - 201
2) Enter the information required for application.
f The details of each item are as follows. Enter the information following the requirement of the certication
organization to apply.
Item Details
Character length
limit
[Common Name] Enter the projector name or the IP address set in the projector. 64 characters
[Country] Enter the country code dened in ISO 3166-1 alpha-2 (two upper case alphabets). ―
[State] Enter the State, etc. 128 characters
[Locality] Enter the locality. 128 characters
[Organization] Enter the organization name. 64 characters
[Organization Unit] Enter the organization unit name. 64 characters
[CRT key]
[RSA key size] The key length of the current CRT key is displayed. ―
[Last modied] The generation date and time of the current CRT key is displayed. ―
3) Click [OK].
f The signing request le is generated. Enter a le name and save the le in the desired folder.
4) Enter a file name and click [Save].
f The le for signing request is saved in the specied folder.
Note
f The characters that can be input are as follows.
g Single-byte numbers: 0 to 9
g Single-byte alphabets: A to Z, a to z
g Single-byte symbols: - . _ , + / ( )
f The signing request generated by the projector is PEM format (le extension: pem).
f Apply issuing of the server certicate to the certication organization using the saved signing request le (PEM format).
Installing the certicate
Install the server certicate and the intermediate certicate issued by the certication organization into the
projector.
1) Click [Certificate] → [Server Certificate install] → [Choose File].
f A dialog to select the le is displayed.
2) Select the server certificate file and click [Open].
f If the intermediate certicate is issued from the certication organization together with the server certicate,
proceed to Step 3).
f If only the server certicate is issued from the certication organization, proceed to Step 5).
3) Click [Choose File] in [Intermediate Certificate install].
f A dialog to select the le is displayed.
4) Select the intermediate certificate file and click [Open].
5) Click [Execute].
f The server certicate and the intermediate certicate are installed into the projector.
6) Click [OK].
Note
f To conrm the information of the installed server certicate, refer to “Conrming the information of the server certicate” (x page 202).