Panasonic PT-MZ17K - Page 202

Chapter 5 Operations — Web control function
202 - ENGLISH
Conrming the information of the server certicate
Conrm the information of the server certicate installed in the projector.
1) Click [Certificate] → [Server Certificate] → [Information] → [Confirm].
f The information of the installed server certicate is displayed. The details of each item are as follows.
Item Details
[Common Name] The projector name or the IP address is displayed.
[Country] The country code dened in ISO 3166-1 alpha-2 (two upper case alphabets) is displayed.
[State] The State, etc. is displayed.
[Locality] The locality is displayed.
[Organization] The organization name is displayed.
[Organization Unit] The organization unit name is not displayed. It is displayed as an asterisk.
[Not Before] Displays the date and time that the self-signed certicate was issued.
[Not After] Displays the date and time that the self-signed certicate will expire.
[CRT key]
[RSA key size] The key length of the CRT key is displayed.
[Last modied] The generation date and time of the CRT key is displayed.
Note
f The installed server certicate and the intermediate certicate can be deleted by clicking [Certicate] → [Server Certicate] → [Delete].
However, it cannot be deleted when [HTTPS set up] → [Connection] is set to [HTTPS]. Delete it after changing the setting to perform the
HTTP communication.
To delete the server certicate within the valid period, conrm that the certicate le used for installing is available on hand. It will be
necessary when installing the server certicate again.
Generating the self-signed certicate
When the server certicate issued by the certication organization is not to be used as the security certicate, it
is possible to use the self-signed certicate generated in the projector. Generate the self-signed certicate after
generating the CRT key.
1) Click [Certificate] → [Self-signed Certificate] → [Generate] → [Execute].
f The page to generate the self-signed certicate is displayed.
2) Enter the information required for generation.
f The details of each item are as follows.
Item Details
Character length
limit
[Common Name] Enter the projector name or the IP address set in the projector. 64 characters
[Country] Enter the country code dened in ISO 3166-1 alpha-2 (two upper case alphabets). ―
[State] Enter the State, etc. 128 characters
[Locality] Enter the locality. 128 characters
[Organization] Enter the organization name. 64 characters
[Organization Unit] Enter the organization unit name. 64 characters
[CRT key]
[RSA key size] The key length of the current CRT key is displayed. ―
[Last modied] The generation date and time of the current CRT key is displayed. ―
3) Click [OK].
f Self-signed certicate is generated.
Note
f The characters that can be input are as follows.
g Single-byte numbers: 0 to 9
g Single-byte alphabets: A to Z, a to z
g Single-byte symbols: - . _ , + / ( )