M
michaelskinnerSep 12, 2025
How to adjust lens shift on a Panasonic PT-MZ17K?
- IigarciaSep 12, 2025
To adjust the lens shift on your Panasonic Projector, perform [LENS CALIBRATION].
To Next PageTo Next PageHow to adjust lens shift on a Panasonic PT-MZ17K?
To adjust the lens shift on your Panasonic Projector, perform [LENS CALIBRATION].
How to control Panasonic Projector with Art-Net?
To control your Panasonic Projector with Art-Net, verify that the connections between the twisted-pair-cable transmitter and an external device, and between the twisted-pair-cable transmitter and the projector are correctly done. Ensure that [Art-Net SETUP] is set to other than [OFF]. Also, check that [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] are set correctly.
General| Brightness | 17, 000 lumens |
|---|---|
| Light Source | Laser |
| Zoom Ratio | 1.6x |
| Resolution | WUXGA (1920 x 1200) |
| Connectivity | HDMI, DVI-D, LAN |
| Native Resolution | 1920 x 1200 (WUXGA) |
| Lamp Life | 20, 000 hours |
| Projection System | 3LCD |
| Input Terminals | HDMI x 2, DVI-D, 3G-SDI, LAN |
| Lens Shift | Vertical: ±60 %, Horizontal: ±25 % (Powered) |
Safety guidelines for projector installation, including environmental and physical placement.
Overview of projector parts, remote control, and initial setup procedures.
Guides on projector installation modes, adjustments, and image placement.
Step-by-step instructions for lens installation and removal.
Guidance on connecting projectors via wired LAN, wireless LAN, DIGITAL LINK.
Procedures for powering the projector on, off, initial setup, and indicator status.
Instructions for lens calibration, focus, zoom, shift, and focus balance adjustments.
Procedures for attaching and removing USB memory devices for data transfer.
Using shutter, on-screen display, test patterns, and function buttons via remote.
How to navigate the on-screen menu and reset settings to factory defaults.
Customizing picture modes, contrast, brightness, color, tint, and gamma.
Adjusting image shift, aspect ratio, zoom, and geometry correction.
Advanced image settings like digital cinema reality, blanking, and edge blending.
Configuring color, screen settings, input backup, OSD, and image rotation.
Core projector setup including lens, network, security, and firmware management.
Procedures for displaying and registering test patterns for image quality checks.
Managing registered signals, renaming, deleting, protecting, and sub memory functions.
Configuring security passwords and control device limitations for projector access.
Guides on connecting the projector via wired and wireless LAN.
Steps to access and control the projector remotely using a web browser.
Checking projector status, network info, and system details via the control panel.
Procedures for copying projector settings via LAN or USB memory.
Guides on operating CEC-compatible devices with the projector remote.
Step-by-step instructions for updating projector firmware via LAN or USB.
Interpreting indicator lights and resolving related projector issues.
Guidelines for cleaning projector exterior, lens, and maintaining the air filter unit.
Solutions for common projector problems like power, image, remote, and network issues.
Understanding error and warning codes from the projector's self-test function.
Details on PJLink protocol, Art-Net functionality, and control commands via LAN.
Technical specs including display system, lens, inputs, acoustic noise, and signals.
Safety guidelines and procedures for mounting the projector on a ceiling.
Statement of compliance with essential requirements of EU directives.
Guidelines for proper disposal of electronic waste and batteries according to regulations.
