Panasonic PT-MZ670

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
[VW431D] VW431D series
6) Press the <ENTER> button.
f The conrmation screen is displayed.
7) Press qw to select [OK], and press the <ENTER> button.
[REMOTE1 MODE]
Set the <REMOTE 1 IN> terminal.
1) Press as to select [REMOTE1 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT] Uses pin assignment of the <REMOTE 1 IN> terminal in standard setting.
[USER]
Use this item when changing the setting of the <REMOTE 1 IN> terminal. (x page 216)
[F/W SERIES] Uses the <REMOTE 1 IN> terminal setting compatible with the F/W series.
f Proceed to Step 3) when [USER] is selected.
3) Press the <ENTER> button.
4) Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3) Press as to select a function.
[DISABLE] Disables the <FUNCTION> button.
[SUB MEMORY]
Displays the sub memory list. (x page 134)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting. (x page 88)
[DAYLIGHT VIEW]
Switches the [DAYLIGHT VIEW] setting. (x page 87)
4) Press the <ENTER> button.
[LENS CALIBRATION]
Detect the lens shift limit value of the projector, and automatically set the home position.
1) Press as to select [LENS CALIBRATION].
2) Press the <ENTER> button.
f The conrmation screen is displayed.
3) Press qw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position.
f The lens stops to complete the lens calibration.
Note
f [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
f [INCOMPLETE] is displayed when the lens calibration was not executed correctly.
f Pressing the <FOCUS> button on the remote control for three seconds or longer will also display the conrmation screen for lens calibration
execution.