Panasonic PT-MZ670

Chapter 5 Operations — Web control function
174 - ENGLISH
[Change password] page
Click [Change password].
1
2
3
4
1 [Administrator]
Used to change the setting of the [Administrator].
2 [User]
Used to change the setting of the [User].
3 [Moderator]
Select this item to change the [Moderator] setting.
4 [Next]
Used to change the setting of the password.
Note
f The [Moderator] account is used when operating in the moderator mode when the MIRRORING input or the Panasonic APPLICATION input
is selected.
[Administrator] account
1
3
2
4
1 [Account]
Displays the account to change.
2 [Current]
[User name]:
Enter the user name before the change.
[Password]:
Enter the current password.
3 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
4 [Change]
Determines the change of password.
Note
f When the projector is already registered in application software (such as “Multi Monitoring & Control Software” or “Smart Projector Control”)
which uses the communication control via LAN, communication with the projector will become impossible if a user name or password for
[Administrator] is changed. If a user name or password for [Administrator] is changed, update the registration information of the application
software in use.