Chapter 5 Operations — Using the pairing function
194 - ENGLISH
5) Once the completion message is displayed in the standby screen, remove the USB memory.
Note
f Use the commercially available USB memory formatted in FAT16 or FAT32 as the USB memory to be used for pairing. Approximately 30 MB
of available space is required.
f Displaying of the image using the image transfer application software is not possible during pairing. Also, the pairing function cannot be
used while displaying the image using the image transfer application software.
f For how to use the image transfer application software “Plug and Share”, refer to the Operating Instructions of “Plug and Share”. Operating
Instructions of “Plug and Share” can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
To Next Page
Loading...
