To Next PageTo Next PageWhy Panasonic PT-MZ780 power does not turn on?
The Panasonic Projector may not turn on for several reasons. Ensure the power plug is firmly inserted into the outlet, the switch is not set to , and the wall outlet is supplying electricity. Check if the circuit breakers have tripped. Also, verify if the light source indicator is blinking or if the temperature indicator is lit or blinking.
What to do if Panasonic PT-MZ780 video from HDMI compatible device does not appear?
If video from an HDMI compatible device does not appear or appears jumbled on your Panasonic Projector, ensure the HDMI cable is securely connected. Try turning the power of both the projector and the external device off and on. Also, verify that the input signal is compatible with the projector.
Why Panasonic Projector operation noise became loud?
The operation noise of your Panasonic Projector may become loud if the temperature inside the projector becomes high, which automatically increases the speed of the internal cooling fan. Ensure that the ambient temperature is not high. Also, check if the air filter unit is dirty or if the intake/exhaust vent is blocked.
Why Panasonic PT-MZ780 no audio is coming from the HDMI compatible device?
To get audio from an HDMI compatible device on your Panasonic Projector, set the audio for the connected device to linear PCM.
General| Native aspect ratio | 16:10 |
|---|---|
| Projection technology | LCD |
| Contrast ratio (typical) | 3000000:1 |
| Screen size compatibility | 40 - 400 \ |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, vertical | -25 - 25 ° |
| Keystone correction, horizontal | -30 - 30 ° |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Focus | Motorized |
| Throw ratio | 1.61 - 2.76:1 |
| Zoom capability | Yes |
| Vertical lens shift range | -67 - 67 % |
| Horizontal lens shift range | -35 - 35 % |
| Audio (L/R) in | 1 |
| Composite video in | 0 |
| HDMI ports quantity | 3 |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 4 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| Noise level | 32 dB |
| Noise level (standby) | 26 dB |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Analog signal format system | - |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 435 W |
| Power consumption (standby) | - W |
| Power consumption (typical) | 395 W |
| Power consumption (economy mode) | 285 W |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Business |
Weight and Dimensions| Depth | 439 mm |
|---|---|
| Width | 561 mm |
| Height | 224 mm |
| Weight | 18600 g |
Essential safety guidelines and installation considerations before operating the projector.
Details on installation modes, projector positioning, and optional mounting hardware.
Step-by-step guide for powering the projector on, off, and understanding the power indicator status.
Covers selecting input signals, adjusting focus, zoom, lens shift, and screen settings.
How to access and control the projector remotely using a web browser interface.
Common problems and their solutions, with references to relevant manual sections.
