Chapter 5 Operations — Web control function
206 - ENGLISH
[Crestron tools] page
Set the information required for connecting the Crestron control system to the projector.
The [Crestron Connected(TM)] page is not displayed if Adobe
®
Flash
®
Player is not installed on your computer, or
the browser you use does not support Flash. In such a case, set [Control System] in this page.
Click [Detailed set up] → [Crestron tools].
1
2
3
4
1 [IP Address]
Sets the IP address of the control system.
2 [IPID]
Sets the IPID of the control system.
3 [Port]
Sets the port number of the control system.
4 [Submit]
Updates the setting.
To Next Page
Loading...
