Chapter 1 Preparation — Precautions for use
28 - ENGLISH
Optional accessories
Optional accessories (product name) Model No.
Projection lens
Zoom Lens
ET-DLE020, ET-DLE060, ET-DLE085, ET-DLE105, ET-DLE150,
ET-DLE170
*1*2
, ET-DLE250, ET-DLE350, ET-DLE450
Fixed-focus Lens ET-DLE035, ET-DLE055
Interface Board
Interface Board for HDMI 2
input
ET-MDNHM10
Interface Board for DVI-D
2 input
ET-MDNDV10
Interface Board for 12G-SDI ET-MDN12G10
Interface Board for
DisplayPort 2 input
ET-MDNDP10
Interface Board for 12G-SDI
Optical
ET-MDNFB10
Wireless Module
*2
AJ-WM50 Series
*3
Ceiling Mount Bracket
ET-PKD120H (for High Ceilings)
ET-PKD120S (for Low Ceilings)
ET-PKD130H (for High Ceilings, 6-axis Adjustment)
ET-PKD130B (Projector Mount Bracket)
Early Warning Software
(Basic license/3-year license)
ET-SWA100 Series
*4
Upgrade Kit ET-UK20
Auto Screen Adjustment Upgrade Kit ET-CUK10
Auto Screen Adjustment Upgrade Kit (PC) ET-CUK10P
NFC Upgrade Kit
*2
ET-NUK10
Digital Interface Box ET-YFB100G
DIGITAL LINK Switcher ET-YFB200G
*1 This product is equivalent to the lens attached to the projector models with standard zoom lens.
*2 The availability of this product varies depending on the country. For details, contact your dealer.
*3 The sufx of the Model No. differs depending on the country.
Example of the Model No. with sufx for AJ-WM50 Series
AJ-WM50E, AJ-WM50G1, AJ-WM50G2, AJ-WM50GAN, AJ-WM50GPX, AJ-WM50P
*4 The sufx of the Model No. differs according to the license type.
Note
f Use the Wireless Module (Model No.: AJ-WM50 Series) in an environment of 0 °C (32 °F) to 40 °C (104 °F), including when
it is attached to the projector.
f For detailed operations and compatible signals when the Interface Board for 12G-SDI Optical (Model No.: ET-MDNFB10) is
installed in the projector, refer to the “Operating Instructions – Functional Manual” (PDF) of the Interface Board for 12G-SDI
Optical. For downloading the “Operating Instructions – Functional Manual”, visit the following URL.
https://panasonic.net/cns/projector/
f The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that
there are some models that have the NFC function enabled from the time of factory shipment, and there are some countries
or regions where the NFC Upgrade Kit cannot be applied.
For the availability of the NFC function in the country or region where you purchased the product, visit the Panasonic website
(https://panasonic.net/cns/projector/) or consult your dealer.
f The model numbers of optional accessories are subject to change without prior notice.
f The optional accessories compatible with the projector may be added or changed without prior notice. The optional
accessories described in this document are as of March 2020.
For the latest information, visit the Panasonic website (https://panasonic.net/cns/projector/).
To Next Page
Loading...
