Chapter 6 Maintenance — [SELF TEST] indications
230 - ENGLISH
Error/warning display Details Action number
F211 Prism fan warning 5
F250 Liquid cooling pump 1 warning 5
F251 Liquid cooling pump 2 warning 5
F300 Radiator fan 3 error 5
F301 Phosphor wheel 1 fan error 5
F302 Phosphor wheel 2 fan error 5
F303 Power supply fan error 5
F304 LD driver fan error 5
F305 Exhaust fan 3 error 5
F306 DMD fan error 5
F307 Exhaust fan 1 error 5
F308 Exhaust fan 2 error 5
F309 Radiator fan 2 error 5
F310 Radiator fan 1 error 5
F311 Prism fan error 5
F350 Liquid cooling pump 1 error 5
F351 Liquid cooling pump 2 error 5
F400 Light source 1 illumination failure 6
F401 Light source 2 illumination failure 6
F450 Light source 1 off 6
F451 Light source 2 off 6
F500 Light source 1 error 6
F501 Light source 2 error 6
Note
f The self-diagnosis display and the details of the malfunction may be different.
f For errors and warnings that are not described in the table, consult your dealer.
r Measure for error and warning
Action
number
Measure
1 The operating environment temperature is too high. Use the projector in an appropriate operating environment temperature
*1
.
2 The operating environment temperature is too low. Use the projector in an appropriate operating environment temperature
*1
.
3 The input supply voltage is low. Use electric wiring that can sufciently withstand the power consumption of the projector.
4 Battery replacement is required. Consult your dealer.
5 If the display does not clear after switching the main power off and on, consult your dealer.
6
The light source has failed to turn on. If the light source does not light up after turning the power off and on, consult your
dealer.
*1 For details of operating environment temperature of the projector, refer to “Operating environment temperature” (x page 257).
To Next Page
Loading...
