Panasonic PT-RCQ10

Chapter 7 Appendix — Technical information
234 - ENGLISH
Channel
Control details
[2] [USER] [1]
CHANNEL5 LENS V SHIFT LENS V SHIFT POWER
CHANNEL6 LENS FOCUS LENS FOCUS LIGHT OUTPUT
CHANNEL7 LENS ZOOM LENS ZOOM ENABLE/DISABLE
CHANNEL8 POWER POWER FADE-IN
CHANNEL9 GEOMETRY GEOMETRY FADE-OUT
CHANNEL10 CUSTOM MASKING CUSTOM MASKING CUSTOM MASKING
CHANNEL11 ENABLE/DISABLE ENABLE/DISABLE GEOMETRY
CHANNEL12 NONE NONE NONE
Control details
r LIGHT OUTPUT
This can be set in 256 steps between 100 % and 0 %.
Performance Parameter Default value
100 % 0
0… …
0 % 255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [1])
Performance Parameter Default value
No operation 0-23
0
No operation 24-31
DVI-D 32-39
HDMI 40-47
DIGITAL LINK 48-55
SDI 56-63
No operation 64-255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [2] or [USER])
Performance Parameter Default value
No operation 0-23
0
DVI-D 24-31
HDMI 32-39
DIGITAL LINK 40-47
SDI 48-55
No operation 56-79
SLOT-1
*1
80-87
SLOT-2
*1
88-95
No operation 96-151
SLOT-1
*2
152-159
SLOT-2
*2
160-167
SLOT-3
*2
168-175
SLOT-4
*2
176-183
No operation 184-255
*1 When the Interface Board equipped with two inputs is installed in the slot, the input is switched to the specied input of the Interface Board.
*2 When the Interface Board equipped with four inputs is installed in the slot, the input is switched to the specied input of the Interface Board.
r LENS POSITION
Performance Parameter Default value
No operation 0-31
0Move to the home position 32-63
No operation 64-255