Panasonic PT-RZ570B

Chapter 4 Settings — [P IN P] menu
112 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously.
1) Press as to select [P IN P MODE].
2) Press the <ENTER> button.
f The [P IN P MODE] screen is displayed.
3) Press as to select a function.
[OFF] P IN P function is not used.
[USER1]
The P IN P function is used with the setting set in “Setting P IN P function” (x page 112).
[USER2]
[USER3]
4) Press the <ENTER> button.
Setting P IN P function
P IN P function settings can be saved to [USER1], [USER2], and [USER3].
1) Press as to select [P IN P MODE].
2) Press the <ENTER> button.
f The [P IN P MODE] screen is displayed.
3) Press as to select the desired mode from [USER1], [USER2], and [USER3], and press the <ENTER>
button.
4) Press as to select [MAIN WINDOW] or [SUB WINDOW], and press the <ENTER> button.
5) Press as to select the input terminal to be displayed in the window, and press the <ENTER> button.
6) Press as to select an item.
[SIZE] Sets the window display size between 10 % and 100 %.
[POSITION] Sets the window display position within the screen.
[CLOCK PHASE]
Sets the value between 0 and +31 when the sub window receives a signal from the <COMPUTER
1 IN> terminal or the <COMPUTER 2 IN/1 OUT> terminal and ickering image or smeared outline
appears.
7) If [SIZE] is selected in Step 6), press the <ENTER> button.
f The sub-menu is displayed.
8) Press as to select an item.
9) Press qw to make adjustment, and press the <MENU> button.
10) If [POSITION] is selected in Step 6), press the <ENTER> button.
11) Press asqw to adjust the position, and press the <MENU> button.
12) If [CLOCK PHASE] is selected in Step 6), press qw to make adjustment.
13) Press as to select [FRAME LOCK].
14) Press qw to switch the item.
f The items will switch each time you press the button.
[MAIN WINDOW] Sets the frame lock for the input signal set in the main window.
[SUB WINDOW] Sets the frame lock for the input signal set in the sub window.