68 - ENGLISH
[Filter counter]
Displays the using time of the lter.
[Timer]
Sets the time to display the warning icon.
[Filter counter
reset]
Resets the lter counter.
Setting [Timer]
If you want to clean the air lter periodically according to the operating environment, the lter warning icon [ ]
can be displayed on the projected screen.
1) Press as to select [Timer].
2) Press the <ENTER> button.
3) Press as to switch the setting of the time.
f The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
[Filter counter reset]
1) Press as to select [Filter counter reset].
2) Press the <ENTER> button.
f The [Filter counter Reset?] screen is displayed.
3) Press as to select [Yes] and then press the <ENTER> button.
f The [OK?] screen is displayed.
4) Press as to select [Yes] and then press the <ENTER> button.
[Test pattern]
Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [Test pattern].
2) Press the <ENTER> button.
f The [Test pattern] screen is displayed.
3) Press as to switch the item.
[Off]
Test pattern is not displayed.
[Gray scale 1]
Select a test pattern so that it is easy to make various adjustments.
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
[Green]
[Blue]
[Cross hatch]
[White]
[Black]
[Raster gray]
4) Press the <ENTER> button.
f The selected test pattern is displayed and the menu screen is disappeared.
Note
f Press the <MENU> button to display the menu screen and select [Off] in [Test pattern] when you want to cancel the Test
pattern function.
[Network]
Initializes the settings of network before using the network function.
Chapter 4 Settings - [Expand] menu
To Next Page
Loading...
