[PROJECTOR NAME]
You can change the projector name. Enter the host name if it is required to use a DHCP server.
1) Press as to select [PROJECTOR NAME].
2) Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f You can enter up to eight characters.
4) After entering the projector name, press as to select [OK] and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is “Namexxxx”. xxxx is a xed value assigned to each projector.
[NETWORK STATUS]
Displays the network information of the projector.
1) Press as to select [NETWORK STATUS].
2) Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3) Press as to switch the the display screen.
f The page will change each time you press the button.
[WIRED LAN] (page 1/3), [WIRELESS LAN] (page 2/3), [Presenter Light] (page 3/3)
[WIRED LAN]
[DHCP] Displays the usage state of the DHCP server.
[IP ADDRESS] Displays the IP address.
[SUBNET MASK] Displays the subnet mask.
[DEFAULT GATEWAY] Displays the default gateway.
[DNS1] Displays the address of the primary DNS server.
[DNS2] Displays the address of the secondary DNS server.
[MAC ADDRESS] Displays the MAC address of wired LAN.
[WIRELESS LAN]
[SSID] Displays the character string of SSID.
[IP ADDRESS] Displays the IP address.
[Presenter Light] [LOGIN PASSWORD] Displays the login password of Presenter Light.
Note
f The network setting is common for the <LAN> terminal and the <DIGITAL LINK/LAN> terminal.
f There is no network setting for the wireless LAN in the projector menu (menu screen). When you attach the optional wireless module (Model
No.: AJ-WM50), you can access the projector via the computer for wireless LAN setting. For details, see “Web control function” → [Network
cong] page → “Wireless LAN” (x page 128).
f A QR code, which makes connection setting with a smartphone easier, is displayed in [WIRELESS LAN] (page 2/3). To directly connect a
smartphone to the projector using the QR code, refer to “Using the QR code” (x page 119).
f The SSID, IP address (wireless) and QR code are not displayed in following cases.
g When the optional wireless module (Model No.: AJ-WM50) is not attached to the <USB (VIEWER/WIRELESS/DC OUT)> terminal
g When the web control → [Network cong] → [WIRELESS LAN] is set to [DISABLE] (x page 128)
[ADMINISTRATOR ACCOUNT]
Set the user name and password of the administrator account.
[PASSWORD POLICY]
Display the policies about the password for the administrator account.
1) Press as to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
ENGLISH - 103
Chapter 4 Settings - [NETWORK] menu
To Next Page
Loading...
