Panasonic PT-VMZ71 - Page 134

[Crestron tools] page
Set the information required to connect the Crestron control system to the projector.
Click [Detailed set up] → [Crestron tools].
1
2
3
4
1 [IP Address]
Set the IP address of the control system.
2 [IPID]
Set the IPID of the control system.
3 [Port]
Set the port number of the control system.
4 [Submit]
Update the settings.
Note
f Set the [NETWORK] menu → [NETWORK CONTROL] → [Crestron Connected(TM)] (x page 106) to [ON] if information prompting users
to conrm projector’s settings is displayed on the [Crestron tools] page.
[Set up password] page (for administrator account)
Click [Set up password].
1
2
3
4
1 [Administrator]
Used to change the setting of the administrator account.
2 [User]
Used to change the setting of the standard user account.
3 [PJLink]
Used to change the setting of the PJLink account.
4 [Next]
Displays the screen to change the setting of the password.
134 - ENGLISH
Chapter 5 Operation of Function - Web control function