[REPEAT]
Sets whether to loop the slideshow.
1) Press as to select [REPEAT].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
After playing the last le, exit the slideshow and return to the thumbnail display.
[ON]
After playing the last le, return to the rst le and repeat playback.
3) Press as to select [APPLY].
4) Press the <ENTER> button.
f The setting will be effective.
[INITIALIZE]
This function is used to return various setting values of [NETWORK] to the factory default value.
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
3) When the [INITIALIZE] screen is displayed, press qw to select [OK] and then press the <ENTER> button.
Note
f If the [SECURITY] menu → [PASSWORD] is set to [ON], the [PASSWORD] screen will be displayed when [INITIALIZE] is selected and the
<ENTER> button is pressed. Continue your operation after entering the security password set for the projector.
f When [INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT] screen is displayed when the projection starts next time.
110 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
To Next Page
Loading...
