Panasonic PT-VW431DE

Technical Information
90
- ENGLISH
Appendix
J
Cable specications
[When connected to a computer]
Projector
1 NC NC 1
Computer (DTE
specications)
2 2
3 3
4 NC NC 4
5 5
6 NC NC 6
7 7
8 8
9 NC NC 9
J
Control commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS
INPUT selection
(Parameter)
VID = Video
SVD = S-video
RG1 = Computer 1(RGB)
RG2 = Computer 2(RGB)
HD1 = HDMI
SCT = Computer 1(Scart)
DL1 = DIGITAL LINK
When Digital interface box
(Optional accessory: ET-YFB100G)
is connected to <DIGITAL LINK>
terminal, and INPUT is selected to
DIGITAL LINK terminal and Digital
interface box at the same time:
(Parameter)
DL1:VID = Video
DL1:SVD = S-video
DL1:PC1 = Computer 1(RGB)
DL1:PC2 = Computer 2(RGB)
DL1:HD1 = HDMI 1
DL1:HD2 = HDMI 2
OSH AV mute function
Turning off the projection and sound temporarily.
Sending the command switches [ON]/[OFF].
Do not switch ON/OFF in a short period of time.
OFZ Freeze Sending the command switches [ON]/[OFF].
AUU Volume up
AUD Volume down
DZU D. ZOOM up
DZD D. ZOOM down
QPW Power query
000 = Standby
001 = Power on
Q$S Lamp condition query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active