Note
f The USB memory can be inserted or removed regardless of the power status of the projector.
Displaying the Memory Viewer screen
1) Insert the USB memory in which the video or still image file is stored into the <USB A (VIEWIER)>
terminal.
f For more information about using USB memory, refer to “Cautions on using USB Memory”. (x page 119)
2) Press the <MEMORY VIEWER> button.
f The memory viewer screen (in thumbnail or list display) will be projected.
f A cursor will be displayed in the thumbnail display area or the list display area on the right of the screen. (The
background is yellow.)
Thumbnail display
List display
Note
f The display method of the Memory Viewer screen (in thumbnail or list display) can be set in [NETWORK/USB] menu →
[MEMORY VIEWER] → [VIEW]. (x page 96)
Operations of the Memory Viewer screen
The following describes the operations after the Memory Viewer screen displays.
When displaying in thumbnail
1)
Press the <AUT
O SETUP/CANCEL> button.
f The cursor moves from the thumbnail display area on the right of the screen to the folder list on the upper left of the
screen. (The background is orange.)
2) Press as to select a folder, then press the <ENTER> button.
f If there is a folder in the lower level, it will be expanded and displayed in the folder list on the upper left of the screen.
f The selected folder (cursor position) is displayed on an orange background.
3) Press asqw to select the desired file.
f The detailed information of the selected le will be displayed in the information area on the lower left of the screen.
4) Press the <ENTER> button.
120 -
ENGLISH
Chapter 5 Operation of Function - Memory Viewer function
To Next Page
Loading...
